By request: I made a smaller version of the original cap board.  This one holds 25mm diameter caps...
This is a blank PCB to mount one or two snapmount electrolytic capacitors, up to 25mm in diameter.   The typical use is for power supply filter capacitors in a tube amplifier or preamp project.
I got tired of figuring out how to clamp or glue common snap-mount capacitors
designed for PCB mounting) in a tube amplifier chassis using point-to-point wiring.  So, I designed this little PCB.
The PCB has space for two caps, that can be used independently, or easily jumpered to connect them in series.  There are spots for bleeder resistors (or voltage equalizing resistors if the two caps are connected in series) that can accommodate small 2W resistors.
It mounts to the chassis via 4 0.125" holes in the corner with M2.5 or #4 screws.  Screws and standoffs areNOT included.
This auction is for one PCB only, no parts or anything else is included.  
Flat rate shipping via FedEx to US destinations is shown. International shipping only via the eBay global shipping program. (Sorry - I know it is expensive, but USPS has become too unreliable). 
LIABILITY DISCLAIMER
A person who constructs or works on electronic equipment may be exposed to hazards, including physical injury, the risk of electric shock or electrocution, and exposure to hazardous substances such as lead, mercury, and other inorganic or organic compounds.  These hazards can result in health problems, injury, or death.  Only qualified persons who understand and are willing to bear these risks themselves should attempt the construction of electronic equipment.  By purchasing this item, the buyer acknowledges these risks.
Vacuum tubes operate at high temperatures, may contain toxic substances, and may have exposed parts that carry hazardous voltages.  There is a risk of electric shock, electrocution, burns, or fires that is inherent in the construction and use of vacuum tube equipment.  By purchasing this item, the buyer acknowledges these risks.
IN NO EVENT SHALL THE SELLER BE LIABLE FOR ANY SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY NATURE including, but not limited to, property damage, personal injury, death or legal expenses. Buyer's recovery from Seller for any claim shall not exceed the purchase price paid by Buyer for the goods, irrespective of the nature of the claim, whether in warrant, contract or otherwise. By purchasing this item, BUYER AGREES TO INDEMNIFY, DEFEND AND HOLD SELLER HARMLESS FROM ANY CLAIMS BROUGHT BY ANY PARTY REGARDING ITEMS SUPPLIED BY SELLER AND INCORPORATED INTO THE BUYER'S PRODUCT.
If you do not agree to this disclaimer, DO NOT BUY THIS ITEM.