Pro-Max 3" Grinding Stone Wheel For Mini Bench Grinder
Description
Pro-Max 3" Grinding Stone Wheel For Mini Bench Grinder
Pro-Max Replacement Spare Grinding Stone Wheel With 10mm Center Hole.
This Grinding Stone Wheel is ideal for most grinding and sharpening processes.
This Wheel fits most 3" variable speed Mini Bench Grinders including Pro-Max /
Silverline / Draper.
Specifications:
Stone Grade: Fine
Wheel Diameter: 3" (75mm)
Wheel Width: 3/4" (18mm)
Bore Diameter: 10mm
Weight: 170 grams
Shipping Returns Order Cut Off Times
Metal Polishing Guide Product Guide
OUR DELIVERY PROMISE:
Honesty is the best policy when it comes to a delivery promise. We monitor our
carriers on a regular basis and believe we use the best companies in the
industry to care for and deliver your goods.
As the majority of our consignments are delivered via external couriers we
cannot guarantee 100% that your goods will arrive with you on the day we state.
On a running average we have found that over 95% arrive on the expected date
the other 5% are susceptible to conditions outside of our command.
If your goods have not arrived on the day we state then it is more than likely
they follow on the next day but please feel free to contact us through eBay.
Please Note: We currently do not deliver on Saturdays, Sundays or Public
Holidays.
We hope you will love your purchase, however if you need to return it, we have
a 30 day return policy.
ORDER CUT OFF TIMES:
Orders received and paid for in full by 12.00pm Monday to Friday, excluding
Public Holidays, are usually dispatched the same day (subject to force
majeure), orders placed after this time will be dispatched the next working
day.
Please Note: We currently do not deliver on Saturdays, Sundays or Public
Holidays.
What is Metal Polishing?
Metal Polishing sometimes known as finishing or buffing is the process of
removing scratches and abrasions from a surface, and creating the desired
brightness of finish on that surface. Polishing, like using sand paper,
consists of procedures each of which is less abrasive than the previous. A
combination of polishing and buffing wheels (mops) and compounds are used with
a buffing machine or a household electric drill (pneumatic tools may also be
used but only at relatively low speeds of 3000 - 4000 rpm max.)
Metal polishing is the particular combination of metal polishing buffing
wheels and metal polishing compounds which gives the desired cut and colouring
action
Important: Please remember to clean and de-grease the item you wish to polish.
Unclean / dirty / greasy material should be prepared properly before being
polished. Deep scratches need to be sanded out with suitable abrasives e.g. wet
and dry paper, sanding mops etc. before the polishing process.
Step By Step Guide To Metal Polishing
For Polishing Soft Precious Metals Or Chrome Please Start At Step Number 7 On
The Guide Below.
1. Attach the tapered mandrel to your drill, or bench grinder / angle grinder
spindle adaptor to your machine and fix tightly.
2. Attach the Sisal polishing wheel onto the mandrel / adaptor and screw on
tightly.
3. Run the machine and apply the relevant polishing compound to the sisal
polishing wheel for approximately 2 seconds. The metal polishing compound is
wax and abrasive based so the motion of the spinning polishing wheel generates
heat which melts the wax and abrasive onto the polishing buffing wheel.
4. Apply the polishing buffing wheel or present the the item to be polished
with medium pressure. It is very important that you remove all marks and
scratches and leave a uniform finish.
5. Apply more polishing compound to the Sisal polishing buffing wheel when
required.
6. When all scratches and marks are removed and the work piece has a uniform
dull finish, remove the Sisal polishing wheel.
7. Attach the Colour Stitch or White Stitch polishing buffing wheel onto
the mandrel or adaptor and screw on tightly.
8. Run the machine and apply the relevant polishing compound to the polishing
buffing wheel for approximately 2 seconds.
9. Apply the polishing buffing wheel or present the the item to be polished
with soft to medium pressure, this will remove the dull finish left by the
first process and leave the work piece with a semi-bright finish.
10. Apply more polishing compound to the polishing buffing wheel when required.
11. When you have a uniform semi-bright finish, remove the Colour Stitch or
White stitch polishing buffing wheel.
12. Attach the ‘G’ Loose Fold or Swansdown WDR buffing wheel onto the mandrel
or adaptor and screw on tightly.
13. Run the machine and apply the relevant polishing compound to the
buffing wheel for approximately 2 seconds.
14. Apply the polishing buffing wheel or present the the item to be polished
with soft to medium pressure. This will remove the semi bright finish left by
the second process and leave the work piece with a bright finish.
15. Apply more polishing compound to the buffing wheel when required.
16. You should now be left with a bright finish.
17. Rub the polished article with a good metal polish like PEEK and a dry soft
micro fibre cloth. This will remove any excess polishing compound and grease
left on the surface.
Metal Polishing Top Tips
Try to constantly vary the directions of which you polish. This is not
always possible but recommended as some articles may be an unsuitable size and
shape.
Use the polishing compound sparingly, black grease marks will appear on
work piece if too much polishing compound has been applied to the polishing
buffing wheel.
Remove black grease marks with Vienna Lime and a dry soft micro fibre cloth.
Remember: apply polishing compound little and often.
If it is possible, polish across marks / scratches - not along them.
If the surface of the work piece is lacquered you must remove the lacquer
before polishing, use a household paint remover available from your local DIY
store.
Remember to wear appropriate safety gear.
Use a different polishing buffing wheel for each colour of polishing
compound.
If you need to use a different polishing compound on the same polishing
buffing wheel, or just to clean the wheel, you can apply a wire brush or a
blunt knife against the rotating wheel to clear the compound residue.
Do not mix different polishing compounds on the same polishing buffing
wheel.
If you are polishing small articles then you can fix your drill into a
vice, this will enable you to polish these small articles with ease.
Sometimes when you have polished a surface you may see a slight coat of
grease or finger marks on the work piece - these can be removed with Vienna
Lime powder. Just rub the powder onto the work piece with a dry soft micro
fibre cloth.
Protect polished articles with a good wax polish.
If you wish to electroplate or lacquer the polished article, please make
sure you use a good de-greaser and do not protect with wax polish. Any dirt or
grease / wax will interfere with the adhesion of the plated metal or lacquer.
Health & Safety
Always Use Safety Equipment - Dust Mask, Safety Spectacles And Gloves Should
Be Worn At All Times.
Always Apply The Item Being Finished To The Area Of The Mop Which Is Rotating
Away From Yourself.
Our Polishing Products
Below is our range of great quality Pro-Max metal polishing products and
tooling with a brief description on what and how they are used. Each of our
metal polishing kits come with a polishing guide to help guide you through the
polishing process.
Pro-Max Metal Polishing Mops And Buffing Wheels
Pro-Max Sisal Metal Polishing Buffing Wheels
These are very fast cutting and hard, they are particularly useful for first
stage polishing operations with Pro-Max Brown Metal Polishing Compound on soft
metals including Aluminium, Alloys, Brass and Copper, and Pro-Max Black Metal
Polishing Compound on hard metals including Steel and Stainless Steel.
Pro-Max Colour Stitch Metal Polishing Buffing Wheel
These are versatile cutting polishing buffing wheels used for general metal
polishing which can be used for first or main stage polishing with Pro-Max
Brown or Pink Metal Polishing Compound on soft metals including Aluminium,
Alloys, Brass, Chrome and Copper, or for second stage polishing with Pro-Max
Green or White Metal Polishing Compound on hard metals including Steel and
Stainless Steel.
Pro-Max ‘G’ Loose Fold Metal Polishing Buffing Wheel
The most popular type of finishing polishing buffing wheel. These metal
polishing buffing wheels can be used with Pro-Max Blue, Green, Pink and White
metal polishing compounds on all metals including Aluminium, Alloys, Brass,
Chrome, Copper, Steel and Stainless Steel. 'G' Loose Fold Metal Polishing
Buffing Wheels are made from 100% white soft cotton, with no hard pieces.
Pro-Max White Stitch Metal Polishing Buffing Wheel
These are made from high grade cotton and are the most popular grade of
Jewellery Polishing Mops used for general polishing operations on
jewellery. They are specifically designed for polishing all precious metals
like Gold, Silver & Platinum with Pro-Max Brown or Jewellers Rouge Metal
Polishing Compound.
Pro-Max Swansdown WDR Metal Polishing Buffing Wheel
These are very soft and versatile, made from high grade cotton, and are the
most popular grade of finishing polishing wheels for jewellery which are used
for final high finishing polishing
operations. They are specifically designed for polishing all precious metals
like Gold, Silver & Platinum with Pro-Max Jewellers Rouge metal polishing
compound.
Pro-Max Metal Polishing Compounds
Pro-Max Brown Metal Polishing Compound - for first or main cut and flattening
on Non-Ferrous (soft) metals.
Pro-Max Blue Metal Polishing Compound - for final buffing and finishing on
Non-Ferrous (soft) metals.
Pro-Max Black Metal Polishing Compound - for first cut and flattening on Steel
and Stainless Steel.
Pro-Max Green Metal Polishing Compound - for final buffing and finishing on
Steel.
Pro-Max White Metal Polishing Compound - for final high polish finishing on
Stainless Steel.
Pro-Max Pink - for main and final high polish finishing on Chrome.
Pro-Max Jewellers Rouge - for polishing soft Precious Metals such as Gold,
Silver and Platinum.
Pro-Max metal polishing compounds are wax based with varying amounts of
aluminium, iron and chromium oxide, plant lipids, and and are not toxic. We do
not have the exact ingredients as these are trade secrets and the proprietary
rights belong to the manufacturing company.
Pro-Max Metal Polishing Machine Adaptors And Tooling
Tapered Mandrels - These are used to attach polishing mops and buffing wheels
to a standard drill
Bench Grinder Spindle Adaptors - These are used to attach polishing mops and
buffing wheels to bench grinders, they come in two standard bore sizes - 1/2"
or 12.7mm and 5/8" or 16mm and fit directly onto the main shaft of the bench
grinder.
Angle Grinder / Car Sander Polisher Adaptors - These are used to attach
polishing mops and buffing wheels to Angle Grinders and Car Sander Polishers,
they have a M14 internal thread that screw directly onto the machine.
https://auth..com/oauth2/authorize?client_id=3Dseller-Platform-PRD-c5d7504c4-b04477c4&state=platform&response_type=code&redirect_uri=3Dsellers-3Dseller-Platfo-twficexq&scope=https://api..com/oauth/api_scope
https://api..com/oauth/api_scope/sell.marketing.readonly
https://api..com/oauth/api_scope/sell.marketing
https://api..com/oauth/api_scope/sell.inventory.readonly
https://api..com/oauth/api_scope/sell.inventory
https://api..com/oauth/api_scope/sell.account.readonly
https://api..com/oauth/api_scope/sell.account
https://api..com/oauth/api_scope/sell.fulfillment.readonly
https://api..com/oauth/api_scope/sell.fulfillment
https://api..com/oauth/api_scope/sell.analytics.readonly>